Category Archives: RENISHAW

RENISHAW PROBE

RENISHAW

Renishaw RMP60M

Renishaw RMP60M

Renishaw RMP60M

RMP60M is a modular version of the RMP60. The RMP60M, probe module, adaptors and extensions need to be purchased separately. RMP60 complies with FCC regulations and operates in the 2.4 GHz range.

1 – RMP60M transmission module
Part number: A-4113-1003

2 – RMP60M probe module
Part number: A-4038-1002

3 – RMP60M 100 mm extension
Part number: A-4038-1010

4 – RMP60M 150 mm extension
Part number: A-4038-1027

5 – RMP60M 200 mm extension
Part number: A-4038-1028

6 – RMP60M LP2 adaptor
Part number: A-4038-0212

7 – LPE3 150 mm extension
Part number: A-2063-7003

8 – LPE2 100 mm extension
Part number: A-2063-7002

9 – LPE1 50 mm extension
Part number: A-2063-7001

10 – MA4 90° adaptor
Part number: A-2063-7600

11 – LP2 probe assembly
Part number: A-2063-6098

12 – RMP60M 3-way adaptor
Part number: A-4113-0784

13 – RMP60M probe module adaptor
Part number: A-4113-0771

14 – MP3 probe
Part number: A-2053-5358

15 – Shorting cover
Part number: A-2053-6468

RMP60M Upgrade Kit
Current users of MP14, MP16 or MP18 radio probes may upgrade to RMP60M. A complete working system (probe, MI14 or MI16 interface and RMM antennas) must be exchanged.
Includes:

  • RMP60M module
  • RMP60M probe module
  • RMI radio machine interface
  • RMI mounting bracket
  • Sealtite kit

Part number: RI-4113-1003

RENISHAW

Renishaw MP15 Probe

Renishaw MP15 Probe

Renishaw MP15 Probe

The MP15 probe is used on small CNC machines with limited Z travel and manual tool changing.  The probe is mounted in the machine spindle with the signal transmission cable connected to the machine control. With the MP15, the illuminated LED switches off every time the probe stylus contacts the work piece.
MP15 Hard-Wired Probe Kit
Part number: A-2116-1802

MP15/MP11 Adaptor
Part number: M-2116-1356

MI8 Interface
Part number: A-2037-0010

RENISHAW

Renishaw RMP60 Radio Transmission Probing System

Renishaw RMP60 Radio Transmission Probing System

Renishaw RMP60 Radio Transmission Probing System

RMP60 is a radio transmission part probing system ideal for use on all machine tools. RMP60 features an integrated probe module delivering exceptional robustness and generous overtravel. RMP60 complies with FCC regulations and operates in the 2.4 GHz range. RMP60 delivers interference-free transmission through the use of FHSS (frequency hopping spread spectrum).

RMP60 supports three methods of probe activation:

  • Radio-on The probe is turned on via an RF signal produced by the RMI and initiated by an M code. The probe is turned off via an RF signal or the internal timer.
  • Spin-on The probe is turned on via an internal centrifugal switch. The probe is turned off via the centrifugal switch or the internal timer.
  • Switch-on The probe is turned on and off via a switch incorporated into the shank, activated when the probe is loaded into the spindle.
  • Sense directions ±X, ±Y, +Z
  • Stylus overtravel
  • X and Y: ±18°
  • Z: 11 mm (0.43 in)
  • Stylus trigger force
  • X and Y: 75 gf – 140 gf
  • Z: 530 gf
  • Unidirectional repeatability 1.0 μm (0.00004 in)

RMP60 Retrofit Kit
Includes:

  • RMP60 probe and transmission system
  • RMI radio machine interface
  • RMI mounting bracket
  • 50 mm and 100 mm ceramic styli
  • Sealtite kit

Renishaw Inspection Plus Software
Installation and applications support
Part number: RMP60-NS-S

RMP60 Hardware Only Kit
Includes:

  • RMP60 probe and transmission system
  • RMI radio machine interface
  • RMI Mounting Bracket
  • 50 mm and 100 mm ceramic styli
  • Sealtite kit

Part number: RMP60-NS-KIT

RMP60 probe kit
Includes:

  • RMP60 probe
  • AA battery (2)
  • Tool kit

Part number: A-4113-0001

RMI Radio Machine Interface
Part number: A-4113-0050

RMI 30 m Replacement Cable
Part number: A-4113-0303

RMI 50 m Replacement Cable
Part number: A-4113-0304

RMI Mounting Bracket
Part number: A-2033-0830

RMI Antenna Cover
Part number: A-4113-0305

Sealtite Conduit
5/16 in conduit, 1 m long. Includes one fitting.
Part number: A-4113-0306

RMP60 Upgrade Kit
Current users of MP14, MP16 or MP18 radio probes may upgrade to RMP60. A complete working system
(MP3 probe, transmission system, MI14 or MI16 interface and RMM antennas) must be exchanged.
Includes:

  • RMP60 probe
  • RMI radio machine interface
  • RMI mounting bracket
  • Sealtite kit

Part number: RI-4113-0001

RENISHAW

Renishaw OMP40 Probing System

Renishaw OMP40 Probing System

Renishaw OMP40 Probing System

The OMP40 is an ultra-compact optical transmission part probing system. Measuring just 40 mm diameter and 50 mm in length, the OMP40 is suitable for all machining and millturn centers. Utilizing a revised state-of-the-art modulated optical transmission method, the system offers the highest level of resistance to light interference when used with the OMI‑2/OMI‑2T.

The OMP40 probe is also backwards compatible with existing OMM/MI12 and OMI receivers, enabling current MP7, MP8, MP9 and MP10 system users to benefit from its innovative features.

  • Sense directions ±X, ±Y, +Z
  • Stylus overtravel
  • X and Y: ±12.5°
  • Z: 6 mm (0.23 in)
  • Stylus trigger force
  • X and Y: 50 gf – 90 gf
  • Z: 585 gf
  • Unidirectional repeatability 1.0 μm (0.00004 in)

OMP40 Retrofit Kit
Includes:

  • OMP40 probe
  • OMM
  • OMM mounting bracket
  • MI12 interface
  • 50 mm and 100 mm ceramic styli
  • Sealtite kit
  • Renishaw Inspection Plus software
  • Installation and applications support

A shank is not included in this kit.

Part number: OMP40-NS-S

OMP40 Hardware Only Kit
Includes:

  • OMP40 probe
  • OMM
  • OMM mounting bracket
  • MI12 interface
  • 50 mm and 100 mm ceramic styli
  • Sealtite kit

Part number: OMP40-NS-KIT

OMP40 Probe Kit
Includes: OMP40
½ AA battery (2)
Tool kit
Part number: A-4071-0001

OMP40 Upgrade Kit
Current users of MP7, MP8, MP9 or MP10 optical transmission probes may upgrade to OMP40. A complete
working system (probe module plus transmission system) must be exchanged.
Includes:

  • OMP40 probe system

Part number: RI-4071-0001

OMP40 Accessories and Replacement Parts
½AA battery (2 pack)
Part number: P-BT03-0007

MP10 Style Shank Adaptor
Part number: A-4071-0031

OMM Optical Receiver
Part number: A-2033-0576

OMM-2 Optical Receiver
Part number: A-5492-0051

OMI-2 Optical Receiver/Interface
Part number: A-5191-0049

OMI-2T optical Receiver/Interface
Part number: A-5439-0049

OMM or OMI Mounting Bracket
Part number: A-2033-0830

MI12 Interface
Part number: A-2075-0142

OSI Interface
Part number: A-5492-2000

Sealtite Conduit for OMM
¼ in conduit, 5 ft long. Includes one fitting.
Part number: SEALTITE, 7455

Sealtite conduit for OMM-2, OMI-2 or OMI-2T
5/16 in conduit, 1 meter long. Includes one fitting.
Part number: A-4113-0306

RENISHAW

Renishaw CP1 Contact Inspection Probe

Renishaw CP1 Contact Inspection Probe

Renishaw CP1 Contact Inspection Probe

The CP1 probe is used on CNC machining centers to perform workpiece set-up and inspection. It is triggered through a conductive stylus via an electronically isolated machine spindle. This system is usually designed into the machine by the OEM. Consult with your OEM to be sure the interface is available before ordering this product.

  • Sense directions ±X, ±Y, +Z
  • Stylus overtravel
  • X and Y: ±17°
  • Z: 7 mm (0.27 in)
  • Unidirectional repeatability 1.0 μm (0.00004 in)

CP1 Probe Kits
Includes:

  • CP1 probe
  • Shank
  • Retention knob
  • PS3-1T 50 mm stylus
  • Stylus tool

Part number: A-2012-0001 (CAT40)
Part number: A-2012-0002 (CAT50)
Part number: A-2012-0003 (BT40)
Part number: A-2012-0004 (BT50)

CP1 Probe (module only)
Part number: A-2012-0007

CP1 Probe Adjustment Module
Part number: A-2012-0064

Conductive Styli
For use primarily with CP1 probe. Ball diameter 5 mm (0.20 in).
Overall gage length 50 mm (1.97 in)
Part number: M-5003-5553

Overall gage length 100 mm (3.93 in)
Part number: M-5003-5808

Overall gage length 150 mm (5.90 in)
Part number: M-5003-6045

RENISHAW

Renishaw OMP400 Optical Probe

Renishaw OMP400 Optical Probe

Renishaw OMP400 Optical Probe

OMP400 is an optical probe using strain gage technology. Measuring just 40 mm diameter × 50 mm in length, OMP400 is suitable for all machining and mill-turn centers requiring uncompromised 3D metrology performance. Utilizing a revised state-of-the-art modulated optical transmission method, the system offers the highest level of resistance to light interference when used with OMI-2. The OMP400 probe is also backwards compatible with existing OMM/MI12 and OMI receivers, enabling current MP7, MP8, MP9 and MP10 system users to benefit from its innovative features.

  • Sense directions ±X, ±Y, +Z
  • Stylus overtravel
  • X and Y: ±18°
  • Z: 11 mm (0.43 in)
  • Stylus trigger force
  • X and Y: 6 gf
  • Z: 260 gf
  • Unidirectional repeatability 0.25 μm (0.00001 in)

Helpful Information

OMP400 Retrofit Kit
Includes:

  • OMP400 probe
  • OMM
  • OMM mounting bracket
  • MI12 interface
  • 50 mm and 100 mm carbon fiber styli
  • Sealtite kit
  • Renishaw Inspection Plus software
  • Installation and applications support

A shank is not included in this kit.

Part number: OMP400-NS-S

OMP400 Hardware Only Kit
Includes:

  • OMP400 probe
  • OMM
  • OMM mounting bracket
  • MI12 interface
  • 50 mm and 100 mm carbon fiber styli
  • Sealtite kit

Part number: OMP400-NS-KIT

OMP400 Probe Kit
Includes:

  • OMP400 probe
  • ½ AA battery (2)
  • Tool kit
  • Part number: A-5069-0001

OMP400 Upgrade KitCurrent users of MP700 optical transmission probes may upgrade to OMP400. A complete working system (probe
module plus transmission system) must be exchanged.

Includes:

OMP400 Probe
Part number: RI-5069-0001

Note: A new shank is required.

OMM Optical Receiver
Part number: A-2033-0576

OMM-2 Optical Receiver
Part number: A-5492-0051

OMI-2 Optical Receiver/Interface
Part number: A-5191-0049

OMI-2T Optical Receiver/Interface
Part number: A-5439-0049

OMM or OMI Mounting Bracket
Part number: A-2033-0830

MI12 Interface
Part number: A-2075-0142

OSI Interface
Part number: A-5492-2000

Sealtite Conduit for OMM
¼ in conduit, 5 ft long. Includes one fitting.
Part number: SEALTITE, 7455 Price: $23
Sealtite Conduit for OMM-2, OMI-2 or OMI-2T
5/16 in conduit, 1 m long. Includes one fitting.
Part number: A-4113-0306

To obtain optimal metrology performance, the following carbon fiber styli are recommended.

Stylus Part number Price

  • 6 × 50 mm CF A-5003-7306
  • 6 × 100 mm CF A-5003-6510
  • 6 × 150 mm CF A-5003-6511
  • 6 × 200 mm CF A-5003-6512

 

 

RENISHAW

Renishaw OMP60 Optical Transmission Probing System

Renishaw OMP60 Optical Transmission Probing System

OMP60 is an optical transmission probing system suitable for medium to large machining and mill-turn centers. Utilizing a revised state-of-the-art modulated optical transmission method, the system offers the highest level of resistance to light interference. The OMP60 probe is also backwards compatible with existing OMM/MI12 and OMI receivers.

OMP60 also supports all methods of probe activation – shank switch, spin and M code – enabling current MP7, MP8, MP9 and MP10 users to benefit from some of its innovative features.

  • Sense directions ±X, ±Y, +Z
  • Stylus overtravel
  • X and Y: ±18°
  • Z: 11 mm (0.43 in)
  • Stylus trigger force
  • X and Y: 75 gf – 140 gf
  • Z: 530 gf
  • Unidirectional repeatability 1.0 μm (0.00004 in)

Helpful Information

 

OMP60 Retrofit Kit
Includes:

  • OMP60 probe
  • OMM
  • OMM mounting bracket
  • MI12 interface
  • 50 mm and 100 mm ceramic styli
  • Sealtite kit
  • Renishaw Inspection Plus software
  • Installation and applications support

A shank is not included in this kit

Part number: OMP60-NS-S

OMP60 Hardware Only Kit
Includes:

  • OMP60 probe
  • OMM
  • OMM mounting bracket
  • MI12 interface
  • 50 mm and 100 mm ceramic styli
  • Sealtite kit

A shank is not included in this kit.
Part number: OMP60-NS-KIT

OMP60 Probe Kit
Includes:

  • OMP60 probe
  • AA battery (2)
  • Tool kit

Part number: A-4038-0001

OMP60 Upgrade Kit
Current users of MP7, MP8, MP9 or MP10 optical transmission probes may upgrade to OMP60. A complete working system (probe module plus transmission system) must be exchanged.
Includes:

  • OMP60 probe system

Part number: RI-4038-0001

OMM Optical Receiver
Part number: A-2033-0576

OMM-2 Optical Receiver
Part number: A-5492-0051

OMI-2 Optical Receiver/Interface
Part number: A-5191-0049

OMI-2T Optical Receiver/Interface
Part number: A-5439-0049

OMM or OMI Mounting Bracket
Part number: A-2033-0830

MI12 Interface
Part number: A-2075-0142

OSI Interface
Part number: A-5492-2000

Sealtite conduit for OMM
¼ in conduit, 5 ft long. Includes one fitting.
Part number: SEALTITE, 7455

Sealtite conduit for OMM-2, OMI-2 or OMI-2T
5/16 in conduit, 1 m long. Includes one fitting.
Part number: A-4113-0306

RENISHAW

Renishaw OMP60M

Renishaw OMP60M

Renishaw OMP60M

OMP60M is a modular version of the OMP60. The OMP60M, probe module, adaptors and extensions need to be purchased separately.

Machine Tool Probes
1 – OMP60M transmission module
Part number: A-4038-1003

2 – OMP60M probe module
Part number: A-4038-1002

3 – OMP60M 100 mm extension
Part number: A-4038-1010

4 – OMP60M 150 mm extension
Part number: A-4038-1027

5 – OMP60M 200 mm extension
Part number: A-4038-1028

6 – OMP60M LP2 adaptor
Part number: A-4038-0212

7 – LPE3 150 mm extension
Part number: A-2063-7003

8 – LPE2 100 mm extension
Part number: A-2063-7002

9 – LPE1 50 mm extension
Part number: A-2063-7001

10 – MA4 90° adaptor
Part number: A-2063-7600

11 – LP2 probe assembly
Part number: A-2063-6098

12 – OMP60M 3-way adaptor
Part number: A-4113-0784

13 – OMP60M probe module adaptor
Part number: A-4113-0771

14 – MP3 probe
Part number: A-2053-5358

15 – Shorting cover
Part number: A-2053-6468

OMP60M Upgrade Kit
Current users of MP7, MP8, MP9 or MP10 optical transmission probes may upgrade to OMP60M. A complete working probe must be exchanged.
Includes:

  • OMP60M module
  • OMP60M probe module

Part number: RI-4038-1003

RENISHAW

Renishaw RMP40 Radio Transmission Probe

Renishaw RMP40 Radio Transmission Probe

Renishaw RMP40 Radio Transmission Probe

RMP40 is the latest generation of radio transmission part probes, ideal for use on small to medium machining centers. RMP40 features an integrated probe module delivering exceptional robustness and generous overtravel. RMP40 complies with FCC regulations and operates in the 2.4 GHz range. RMP40 delivers interference-free transmission through the use of FHSS (frequency hopping spread spectrum).
RMP40 supports two methods of probe activation:

  • Radio-on The probe is turned on via an RF signal produced by the RMI and initiated by an M code. The probe is turned off via an RF signal or the internal timer
  • Spin-on The probe is turned on via an internal centrifugal switch. The probe is turned off via the centrifugal switch or the internal timer
  • Sense directions ±X, ±Y, +Z
  • Stylus overtravel
  • X and Y: ±12.5°
  • Z: 6 mm (0.24 in)
  • Stylus trigger force
  • X and Y: 50 gf – 90 gf
  • Z: 585 gf
  • Unidirectional repeatability 1.0 μm (0.00004 in)

RMP40 Retrofit Kit
Includes:

  • RMP40 probe and transmission system
  • RMI radio machine interface
  • RMI mounting bracket
  • 50 mm and 100 mm ceramic styli
  • Sealtite kit

Renishaw Inspection Plus software
Installation and applications support
A shank is not included in this kit.
Part number: RMP40-NS-S

RMP40 hardware only kit
Includes:

  • RMP40 probe and transmission system
  • RMI radio machine interface
  • RMI mounting bracket
  • 50 mm and 100 mm ceramic styli
  • Sealtite kit

Part number: RMP40-NS-KIT

RMP40 Probe Kit
Includes:

  • RMP40 probe
  • ½AA battery (2)
  • Tool kit

Part number: A-5480-0001

RMI Radio Machine Interface
Part number: A-4113-0050

RMI 30 m Replacement Cable
Part number: A-4113-0303

RMI 50 m Replacement Cable
Part number: A-4113-0304

RMI Mounting Bracket
Part number: A-2033-0830

RMI Antenna Cover
Part number: A-4113-0305

Sealtite Conduit
5/16 in conduit, 1 m long.

Includes one fitting.
Part number: A-4113-0306

RENISHAW

Renishaw MP1 Probe System

Renishaw MP1 Probe System

Renishaw MP1 Probe System

The MP1 is ideal for small machining center applications, and utilizes either hardwired or inductive transmission. Inductive transmission allows for automatic tool changing of the probe, as both power and probe signals are transmitted across a small air gap.

  • Sense directions: ±X, ±Y, +Z
  • Stylus overtravel:
    • X and Y: ±17.5°
    • Z: 8 mm (0.31 in)
  • Stylus trigger force:
    • X and Y: 57 gf – 115 gf
    • Z: 380 gf
  • Unidirectional repeatability 1.0 μm (0.00004 in)

MP1 Features and Benefits

  • Designed for fitment by machine builders
  • Design provides inherent repeatability for all stylus configurations
  • Modular range of extensions and adaptors available

MP1 System Options

Inductive transmission is not recommended for retrofit installations.

  • MP1/S with IMP/IMM:  Side electrical transmission
  • MP1/R with IMP/IMM:  Rear electrical transmission

MP1 Accessories

  • A-2051-7080    MA1 probe adaptor
  • A-2051-7146    MA1-R probe adaptor
  • A-2051-4777    MP1/R 3-way mounting block

 

The MP1 probe is available in two versions:

  • MP1/S with side electrical connection
  • MP1/R with rear electrical connection

MP1 Replacement Parts

  • M-2051-4522    MP1/S probe seal
  • M-2054-6583    MP1/R probe seal
  • A-2051-7105    Outer diaphragm replacement kit
  • A-2053-7531    TK1 tool kit
  • P-SC01-0430    M4x30 screws (used with MA1 adaptor)

MP1/S probe
Includes:

  • MP1/S probe head with seal
  • Ø8 ball
  • 4 socket cap head screws (probe to shank) M4 × 0.7, 30 mm long
  • TK1 probe head tool kit

Part number: A-2051-4576 (Call or e-mail us for price quote and wholesale pricing)
MP1/R probe
Includes:

  • MP1/R probe head with seal
  • Ø8 ball
  • 4 socket cap head screws (probe to mounting) M4 × 0.7, 30 mm long
  • TK1 probe head tool kit

Part number: A-2051-4577 (Call or e-mail us for price quote and wholesale pricing)

Renishaw MP1 Data Sheet: 

Renishaw MP1 Installation and Users Guide: