Renishaw RMP40 Radio Transmission Probe
Renishaw RMP40 Radio Transmission Probe
RMP40 is the latest generation of radio transmission part probes, ideal for use on small to medium machining centers. RMP40 features an integrated probe module delivering exceptional robustness and generous overtravel. RMP40 complies with FCC regulations and operates in the 2.4 GHz range. RMP40 delivers interference-free transmission through the use of FHSS (frequency hopping spread spectrum).
RMP40 supports two methods of probe activation:
- Radio-on The probe is turned on via an RF signal produced by the RMI and initiated by an M code. The probe is turned off via an RF signal or the internal timer
- Spin-on The probe is turned on via an internal centrifugal switch. The probe is turned off via the centrifugal switch or the internal timer
- Sense directions ±X, ±Y, +Z
- Stylus overtravel
- X and Y: ±12.5°
- Z: 6 mm (0.24 in)
- Stylus trigger force
- X and Y: 50 gf – 90 gf
- Z: 585 gf
- Unidirectional repeatability 1.0 μm (0.00004 in)
RMP40 Retrofit Kit
Includes:
- RMP40 probe and transmission system
- RMI radio machine interface
- RMI mounting bracket
- 50 mm and 100 mm ceramic styli
- Sealtite kit
Renishaw Inspection Plus software
Installation and applications support
A shank is not included in this kit.
Part number: RMP40-NS-S
RMP40 hardware only kit
Includes:
- RMP40 probe and transmission system
- RMI radio machine interface
- RMI mounting bracket
- 50 mm and 100 mm ceramic styli
- Sealtite kit
Part number: RMP40-NS-KIT
RMP40 Probe Kit
Includes:
- RMP40 probe
- ½AA battery (2)
- Tool kit
Part number: A-5480-0001
RMI Radio Machine Interface
Part number: A-4113-0050
RMI 30 m Replacement Cable
Part number: A-4113-0303
RMI 50 m Replacement Cable
Part number: A-4113-0304
RMI Mounting Bracket
Part number: A-2033-0830
RMI Antenna Cover
Part number: A-4113-0305
Sealtite Conduit
5/16 in conduit, 1 m long.
Includes one fitting.
Part number: A-4113-0306