RENISHAW

Renishaw TS20 Probe For HPA

Renishaw TS20 Probe For HPA

Renishaw TS20 Probe For HPA

The TS20 is a two axis probe for use with the original high precision arm (HPA).
Part #/Tooling size/Stylus overtravel with straight styli/Unidirectional repeatability 1 μm/
Trigger force **

  • A-2048-0550/25 mm/+6 mm/1 μm/60 g – 160 g
  • A-2008-0151/(0.98)/(+.24 in)/(0.00004 in)/(2.15 oz – 5.64 oz)

 

  • A-2008-0110/32 mm/+7.5 mm/1.25 μm/47 g – 126 g
  • A-2008-0123/(1.26)/(+.30 in)/(0.00005 in)/(1.66 oz – 4.44 oz)

 

  • A-2008-0121/40 mm/+9 mm/1.5 μm/39 g – 106 g
  • A-2008-0277/(1.57)/(+.35 in)/(0.00006 in)/(1.38 oz – 3.74 oz)

* at probing speed of 480 mm/min (1,575 ft/min)
** dependent on sense direction

TS20 probe with straight stylus and Lemo connector

  • Part number: A-2048-0500 (25 mm tooling)
  • Part number: A-2008-0110 (32 mm tooling)
  • Part number: A-2008-0121 (40 mm tooling)

TS20 probe with straight stylus and 5 m cable

  • Part number: A-2008-0151 (25 mm tooling)
  • Part number: A-2008-0123 (32 mm tooling)
  • Part number: A-2008-0277 (40 mm tooling)

TS20 replacement stylus kit
Includes stylus 10×10×4, break protect link, adaptor and screw.

  • Part number: A-2008-0601 (25 mm tooling)
  • Part number: A-2008-0602 (32 mm tooling)
  • Part number: A-2008-0603 (40 mm tooling)

TS20 break protect link

  • Part number: M-2008-0333 (25 mm tooling)
  • Part number: M-2008-0604 (32 mm tooling)
  • Part number: M-2008-0605 (40 mm tooling)