Renishaw RMP600 Radio Transmission Probe System

Renishaw RMP600 Radio Transmission Probe System

RMP600 is the latest generation compact radio transmission probe using strain gage technology. Measuring only 63 mm in diameter and 76 mm in length, with an omni-directional transmission distance of 15 m, it is ideal for use on all machine tools. RMP600 features an integrated probe module delivering exceptional robustness and generous overtravel.

It delivers interference-free transmission through the use of FHSS (frequency hopping spread spectrum). RMP600 complies with FCC regulations and operates in the 2.4 GHz range.

RMP600 supports three methods of probe activation:

• Radio-on The probe is turned on via an RF signal produced by the RMI and initiated by an M code. The probe is turned off via an RF signal or the internal timer.
• Spin-on The probe is turned on via an internal centrifugal switch. The probe is turned off via the centrifugal switch or the internal timer.
• Switch-on The probe is turned on and off via a switch incorporated into the shank, activated when the probe is loaded into the spindle.

• Sense directions ±X, ±Y, +Z
• Stylus overtravel
• X and Y: ±15°
• Z: 11 mm (0.43 in)
• Stylus trigger force
• X and Y: 10 gf
• Z: 193 gf
• Unidirectional repeatability 0.25 μm (0.00001 in)

RMP600 retrofit kit
Includes:

• RMP600 probe
• RMI radio machine interface
• RMI mounting bracket
• 50 mm and 100 mm carbon fiber styli
• Sealtite kit

Renishaw Inspection Plus Software
Installation and application support
A shank is not included in this kit.
Part number: RMP600-NS-S

RMP600 Hardware Only Kit
Includes:

• RMP600 probe
• RMI radio machine interface
• RMI mounting bracket
• 50 mm and 100 mm carbon fiber styli
• Sealtite kit

Part number: RMP600-NS-KIT

RMP600 probe kit
Includes:

• RMP600 probe
• AA battery (2)
• Tool kit

Part number: A-5312-0001

RMI Radio Machine Interface
Part number: A-4113-0050

RMI 30 m Replacement Cable
Part number: A-4113-0303

RMI 50 m Replacement Cable
Part number: A-4113-0304

RMI Mounting Bracket
Part number: A-2033-0830

RMI Antenna Cover
Part number: A-4113-0305

Sealtite Conduit
5/16 in conduit, 1 m long. Includes one fitting.
Part number: A-4113-0306

RMP600 Upgrade Kit
Current users of MP14, MP16 or MP18 radio probes may upgrade to RMP600. A complete working system
(MP3 probe, transmission system, MI14 or MI16 interface and RMM antennas) must be exchanged.
Includes:

• RMP600 probe
• RMI radio machine interface
• RMI mounting bracket
• Sealtite kit

Part number: RI-5312-0001